Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fat Shark lipo
#1
Battery on my goggles does not seem to ever fully charge. I've left it on before upwards 90 minutes. The voltage just fluctuates around 8.20. The goggles also seem to die fairly quick. When I take the battery out and check the voltage it comes back barely half. Is it possible the cells aren't balancing?

Anyone reason I can't solder a 2.1 mm barrel connector to an xt60 and use one of my own 2s? Will the battery alarm on the goggles still work?
Reply
Login to remove this ad | Register Here
#2
do you have a voltage alarm that reads 2S cell by cell? or just simply measure the voltage of each cell with your multimeter.

Yes you can modify the cable.. I did mine.
https://oscarliang.com/fpv-goggle-power-...connector/

I am using a 2S 1300mah pack, and it's A LOT better than the stock battery. I get nearly 3 hours from each charge.
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
[-] The following 1 user Likes Oscar's post:
  • K24cl9
Reply
#3
Your tutorial is exactly what I am looking to do. I have some spare 2200 mah batteries I wanted to use
Reply
#4
Never noticed this thread.

I'm using old rc car lipo, 2s 4200mAh, with a loooong wire so i can carry it in a pocket. Lasts forever, and ever, everever.
Reply
#5
The Fatshark lipo is a very poor quality battery. Bought my goggles in june, and the battery has already puffed so the black lid has fallen off
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Tutorial ISDT SC-608 and SC-620 LiPo Charger Firmware Update Oscar 32 80,439 28-Feb-2024, 06:19 AM
Last Post: QuadSmack
  Discussion LiPo going up in smoke! swequad 15 658 07-Nov-2023, 07:34 AM
Last Post: BadRaven
  LiPO Voltage drop? william_hunter 5 399 03-Oct-2023, 06:19 PM
Last Post: SnowLeopardFPV
  Help Is my Lipo DEAD or charger DEAD ? Traxxrc1 6 754 08-Aug-2023, 12:32 PM
Last Post: stxrus
  Discussion a hypothetical LiPo question stxrus 3 407 17-Jul-2023, 02:36 PM
Last Post: stxrus


Login to remove this ad | Register Here