The Quad weighs 285g without GoPro and Lipo. Due the X setup it really feels free and agile and that makes it perfect to freestyle with.
I took me around 2-3 hours to build, the pdb and plug and play receiver really made it easy and clean.
Down here some pictures of the quad
![[Image: 294lzxy.jpg]](http://i64.tinypic.com/294lzxy.jpg)
![[Image: 2ibgg20.jpg]](http://i63.tinypic.com/2ibgg20.jpg)
![[Image: EpiReX_9.jpg]](https://dl.dropboxusercontent.com/u/2741941/Forum/rcgroups/ProjectX/EpiReX_9.jpg)
Here the EpiPdb with Frsky compatible receiver(EpiRex)
Flight Controller FC: Naze32 Rev6
Motor: Xnova 1806 2300KV motors
Propeller: GF 4045 Bullnose
ESC: Littlebee 20A ESC
PDB: EpiPdb
Radio EpiRx (custom receiver)
Video Transmitter VTX: Immersionrc 5.8 Ghz 600 mW Race Band
OSD： Micro MinimOSD with MWOSD 1.4 firmware
LiPo: Vcanz 4S 1500mah
HD Camera: GoPro session
I have not yet made a build log but I will be doing that soon.
Here is a video when I had some fun flying in the local park:
I took me around 2-3 hours to build, the pdb and plug and play receiver really made it easy and clean.
Down here some pictures of the quad
Here the EpiPdb with Frsky compatible receiver(EpiRex)
Flight Controller FC: Naze32 Rev6
Motor: Xnova 1806 2300KV motors
Propeller: GF 4045 Bullnose
ESC: Littlebee 20A ESC
PDB: EpiPdb
Radio EpiRx (custom receiver)
Video Transmitter VTX: Immersionrc 5.8 Ghz 600 mW Race Band
OSD： Micro MinimOSD with MWOSD 1.4 firmware
LiPo: Vcanz 4S 1500mah
HD Camera: GoPro session
I have not yet made a build log but I will be doing that soon.
Here is a video when I had some fun flying in the local park:
![[-]](https://intofpv.com/images/collapse.png)
