dear fanatics

got a question
what is the resistance between signal and ground in your vtx?

https://drive.google.com/open?id=0ByAqK1...p1SDF6QXhJ

pins for ground and signal are behaving strange... 175 instead of "1"
normaly on multimeter i have "1" as no connection...
i've tested this with power pin... and i have "1"

my signal is terrible so im suspecting grounding of the signal somewehere need second opinion

as long as it's not "shorted" (zero ohm) I think it's pretty normal.
if the signal pin is shorted to ground you won't get any video at all lol
the problem might have nothing to do with this, what sort of problems are you having?

Almost no video
for now ive extracted fpv... scrappy will be los for now

I have 5X ET200's/ET200R's and I had one just stop working.
All the LED's still light up, but just not transmitting anything. I swapped the bad VTX to working setups and good VTX's to the same vehicle, just to confirm. It's dead.

1/5 bad... not great, but I like how these VTX's seem to have some LC filtering onboard.

-yelrx8

If you think et200 has filtering, try an aomway