Hello guys,

I got to opportunity to be a member of a drone camp where young people will learn to build and fly a drone in just one week.
Now i'm looking for a drone that is almost crash resisstant and easy to build. Because of the short time and big change that not every one can solder we would like to use (bullet) connectors to make it plug and play. I was thinking of the eachine wizzard this because of his 4 mm arm thickness and easy to change the arm if one got broken. But i would like to build in some custom parts and not use the complete wizzard and I am curious about your opinion.

The shopping list:
Wizzard frame
BR2206 2200KV motors
RS30A Lite BB2 ESC
Kingkong 5040 5x4x3 props
F3 EVO Cleanflight Flight Controller for Multirotor Racing w/ 4G MicroSD
Led motor mount
Motor protector
Landing skid
Matek Systems PDB-XT60 W/ BEC 5V & 12V
Flysky FS-i6X
X6B i-BUS Receiver

Hobbyking has a cheap PDB with bullet connectors already mounted (available in EU store for <5 euros).

https://hobbyking.com/en_us/hobby-king-q...tore=en_us

You EVOs will need soldering and a fair bit of it.

I'd lean to a $99 based build but maybe on a 250mm ZMR style frame. More room for wiring, but common cheap hardware with boundless YouTube channels to learn from after the camp.

(07-Jun-2017, 05:38 PM)sloscotty Wrote: Hobbyking has a cheap PDB with bullet connectors already mounted (available in EU store for <5 euros).

https://hobbyking.com/en_us/hobby-king-q...tore=en_us

Thank you for the suggestion, but then i miss the 5v for the RX and maybe we want to put on one or two quads a FPV setup so they can also experience that and therefor i need 12V.

(08-Jun-2017, 11:15 AM)Aaron Wrote: You EVOs will need soldering and a fair bit of it.

I'd lean to a $99 based build but maybe on a 250mm ZMR style frame. More room for wiring, but common cheap hardware with boundless YouTube channels to learn from after the camp.

I will look at the ZMR frame, thanks for the suggestion. The drones stay at the camp they will not go home with the kids.

(12-Jun-2017, 11:47 AM)Ikkuh Wrote: The drones stay at the camp they will not go home with the kids.

Candy from a baby, can I come?!

What do you guys think about the falcon frame from eachine?
https://www.banggood.com/Eachine-Falcon-...mds=search

basically ZMR250 with sides and some plastic mounts(leds most likley) for motors...
1st ditch the "leg"
2nd i don't like the mount for fpv camera (personal preference - i like it connected to the frame, when jello shows you know something is wrong)

What do you mean by the "leg"?
The fpv setup will not be used on the most drones, i think maybe 2 or 3 of them so i will not add to much value at that, it must be flyable but not perfect if you know what i mean.

Okay guys you changed my mind about the frame I have dropped the falcon and wizard frame I have chosen for the Martian II 250 frame.

Just a few orders came in. Still a few to go.

Oh gawd! That's gonna be so much fun!!

damn those parts look impressive

I only got 2 weeks to get 10 quads up in the air so wish me some luck haha.

First one is ready, it's completely plug and play build.

Wow! That was fast!