24-Oct-2016, 02:27 PM
The daylight video is with Phantom 2212 920kv. The night video I switched to the 2312 960kv. Both was running the same 5200mah 3s lipo. Let me know what you think.
dji motor test |
24-Oct-2016, 02:27 PM The daylight video is with Phantom 2212 920kv. The night video I switched to the 2312 960kv. Both was running the same 5200mah 3s lipo. Let me know what you think. 26-Oct-2016, 11:21 PM you have a lot of vibration on your quad, you could check which motor/prop is generating it and investigate, then your movies will have much lower jello effect. if lazy: check prop balance if not lazy: investigate motors + props => much lower vibration All the best Grzesiek (Grisha/ Greg) Curently flyable: Nox 5, Minimalist 112 Bench / in progres: fixing Nox 3, Scrap thinking about building: 450 27-Oct-2016, 05:38 PM (26-Oct-2016, 11:21 PM)Grisha0 Wrote: you have a lot of vibration on your quad, you could check which motor/prop is generating it and investigate, then your movies will have much lower jello effect. The new dji motors are so much better. I know it is hard to tell in the night video. And I have my gopro hard mount, and that doesn't help the jello. The phantom motors came off my fc40 that had well over 150 flights, I would say the bearings are getting to the end of there service life. My next motors for my f450 will be something bigger then 22's, maybe 3508 or 3108? I would like to get a little better flight times. |
« Next Oldest | Next Newest » |
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Chimera 7 motor replacement video | Duke Nukem | 0 | 463 | 19-Sep-2023, 04:28 AM Last Post: Duke Nukem | |
Conformal Coating Ultimate Test! | relentlesstech | 11 | 880 | 01-Apr-2023, 07:54 AM Last Post: Luz | |
Happy model EP1 true diversity rx test. | martijnv | 0 | 557 | 11-Feb-2023, 04:08 PM Last Post: martijnv | |
New Build Test Run | relentlesstech | 0 | 228 | 13-Jun-2022, 05:24 PM Last Post: relentlesstech | |
Hero 7 Naked Test | zerogravity | 0 | 244 | 09-May-2022, 05:58 PM Last Post: zerogravity |