Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cursed Tiny6
#1
Hello, I got my kinkong tiny6 month ago with bad motor. I bought another 4 motors to swap.
But now, when Im connect battery nothing happend. When I connect us, I can see everytihng works well. I can event run a motors in betaflight. 
I tried to reflash it, Reflash OK, But still, after connecting a battery nothing happend.
Reply
Login to remove this ad | Register Here
#2
Just checked battery with multimetter. Its charged. VTX sending video, RX blinking. everything seems fine, but It wont turn on without USB

O_O
Reply
#3
Oh no man! Sounds like a return to sender to me.
Windless fields and smokeless builds
Reply
#4
sounds like the voltage regulator or possibly the diode between that and the battery is dead? you can try replacing the flight controller if you want to fix it.
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
Reply



Login to remove this ad | Register Here