The AIO cameras, are those little cameras that come with a fixed video transmitter to the back of the camera.
It is impossible to look to get your video signal in order to superimpose the OSD. Well in this case it is possible!
We'll show you how.
Necessary material :
It must first isolate where passes the video signal on the AIO.
In this case, it comes to the more PIN above, aim left.
You will need to remove this junction to the first using your soldering iron by melting the plastic, and then, using a cutter.
Then comes the solder a piece of wire on the VTX and another end of the cable to the camera.
It remains for you to connect your cables VIN and VOUT your card to make a test before the clean.
Video
good mod
It is impossible to look to get your video signal in order to superimpose the OSD. Well in this case it is possible!
We'll show you how.
Necessary material :
It must first isolate where passes the video signal on the AIO.
In this case, it comes to the more PIN above, aim left.
You will need to remove this junction to the first using your soldering iron by melting the plastic, and then, using a cutter.
Then comes the solder a piece of wire on the VTX and another end of the cable to the camera.
It remains for you to connect your cables VIN and VOUT your card to make a test before the clean.
Video
good mod
https://pimousse.be/ Belgian FPV & Aeromodelism