Finally there is an affordable 0820 (or 8520) brushed motor for 2S Lipo. Good news for those who wants more power on their micro quad.
This motor is for 2S Lipo only (won't work well with 1S). Going to get some and try on the whoopee frame.

http://www.banggood.com/Chaoli-CL-820-8_...84265.html

Spec

• Motor Diameter: 8.5mm
  
• Motor Length: 20mm
  
• Shaft Diameter: 1.0mm
  
• Cable Length: 60mm
  
• Weight: about: 5.3g
  
• Option: Clockwise Motor(With Red Blue Wire), Anti-clockwise Motor(With Black White Wire)
  
• Option: With 1.25mm JST Plug
  
• Operating voltage range DC3.0-7.4V DC
  
• Rated voltage 7.0V DC
  
• No Load speed 52000rpm ±12%
  

I had a glimpse into the days to come. I met Future Oscar. He was talking about a micro brushless motors thrust test stand he just printed. He was pretty enthusiastic talking about 3s packs he uses on his 180mm Whoopee v4. He was also talking about why he needs a bigger coat hanger on his ceiling.

This is the future guys.



Future Oscar has spoken!

---

Cheers Present Oscar ;D

LOL!!!

Hi Oscar & community!
I will post an intro soon, just wanted to find out if you have any info to update us with re. this 2s motor and if this may pave a way for a 2s Tiny Whoop?

Love the blog and forum, massively appreciate all the info you have been sharing.

(11-Sep-2016, 05:59 AM)Tom BD Bad Wrote: Hi Oscar & community!
I will post an intro soon, just wanted to find out if you have any info to update us with re. this 2s motor and if this may pave a way for a 2s Tiny Whoop?

Love the blog and forum, massively appreciate all the info you have been sharing.

but first there needs to be a 2S FC that fits the tiny whoop...

Im using the MMW Dark Edition, which are basically the same as these, i believe. I have it in a 1S brushed frame with a Nuke controller. I see you say it should be 2S only. Why is that? What performance degradation will i see, if any?

I could be wrong, but the MMW Dark Edition motors aren't the same as these.
These have an operating voltage of DC3.0-7.4V DC whereas the rated voltage of the MMW motors are 1.5-3.7.
I'm guessing you'd toast those MMW motors very quickly on 2s. But I don't really know.

Did I misinterpret the question?