Changed Board Orientation 180° but Pitch direction is different

[Morphin]

Hi

I have INAV 3.0 flashed, Calibrated Compass and then loaded the Fling WIng and Airplane without Tail Presets.
I Reversed one Servo and Roll seems fine, but Pitch is always one Up and one down (Manual mode). Very strange

Is it because the orientation of the board is 180° reversed? In the configuration i set unter "Board and Sensor Alignment" 180.0 Yaw Degrees

Do i have to change something in the mixer?

Thank's for every hint

Andy

[Rob Axel]

I’m not familiar with fixed wing stuff, but I have mounted several quad FCs “non-factory”… it’s a matter of making changes in betaflight board orientation so the aircraft on the screen matches your movements with the actual aircraft…depending on how you mount the fc will depend on the “settings/adjustments” made….
I have not changed anything in the “mixers”…

[Morphin]

Thank's. It seems that the pins from one Servo is bendet while plug into the FC.. I have to check. Thank's

[Morphin]

That was the error.... ONe pin from the servo cable bendet...