Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CC3D Roll Issue
#1
So i had cleanflight installed on my 250 quad but it just wouldn't work properly so i decided for the time being i would put open pilot back on it and it worked like a charm. 

However today the quad started rolling to the right, nothing has been changed and nothing seems to be causing this from what i can see. Can anyone suggest anything to try out to see if it will help fix it. 

Thanks in advance.

Not sure if this will help but the last time it flew the battery died on me and it went into a sort of fail safe however this cause it to suddenly try and land and it rolled to the right to land and crashed. This is the issue that it is having now but that it on a fresh pack so its nothing to do with the failsafe. Grrrrrr i hope i sort this out lol
lol FPV
Ragg-e WBX 5"
BUILD
MY CHANNEL
Reply
Login to remove this ad | Register Here
#2
could that be your RX? do you have footage of that problem?
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
Reply
#3
Could it be that you have destroyed a motor by the crash? All spinning freely and make the same noise?
My quad: 
RD-210 / ZMX V3 2206 2140kv / Aikon SEFM 30A / X-Racer F303 V3 / X4R-SB / Dronelab 1500 4S 50C
Reply
#4
(09-Mar-2016, 01:39 AM)Oscar Wrote: could that be your RX? do you have footage of that problem?
I tried a lot of different things last night but nothing seemed to work unfortunately.
Ill try and film it on my lunch brake today if i can't get it sorted before then.

(09-Mar-2016, 01:52 AM)Luc Wrote: Could it be that you have destroyed a motor by the crash? All spinning freely and make the same noise?

That was my initial though but they all seem fine apart from the front right motor which glitches slightly on startup, but after that it runs fine.
lol FPV
Ragg-e WBX 5"
BUILD
MY CHANNEL
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  betaflight config 10.10 RC2 issue Rob Axel 3 184 10-Feb-2024, 01:21 PM
Last Post: Rob Axel
  random uncommanded yaw issue in flight? husafreak 30 837 16-Jan-2024, 05:32 AM
Last Post: husafreak
  Problem spike on roll ADRY 3 512 17-Oct-2021, 06:17 PM
Last Post: ADRY
  Binding FrSKY R-XSR to Jumper T18 Lite ISSUE Rollo137 1 2,197 06-Aug-2020, 12:48 PM
Last Post: SnowLeopardFPV
  Quad looses connection and falls after 360 Roll applied Seanalami 30 2,384 24-Jul-2020, 08:15 PM
Last Post: Seanalami


Login to remove this ad | Register Here