Using a Foxeer Monster v2 and Flycolor Raptor S AIO. I can see the Foxeer battery voltage and time but want the FC OSD..

I've tried switching the camera and MWOSD from PAL to NTSC trying differing combinations without any luck. With either PAL or ntsc selected, I do not see my FC OSD which I've set up with MWOSD.

What am I missing? Thanks.

Assuming you have your Cam and VTx wiring correct to the FC, have you double checked your UART settings in the Ports tab? (That's all I can think of.)

(09-Jul-2017, 08:52 AM)sloscotty Wrote: Assuming you have your Cam and VTx wiring correct to the FC, have you double checked your UART settings in the Ports tab? (That's all I can think of.)

Wiring has to be correct since each is coming out of their respective slots on the FC and soldered onto the cables that plug into each.

UART 2 is open and that's what I used for serial pass through to get the mwosd program to recognize everything.

So stumped.

Did you unplug the FC from USB (and power) before trying to view in your goggles? That needs to be done to clear serialpassthrough.

(09-Jul-2017, 05:37 PM)sloscotty Wrote: Did you unplug the FC from USB (and power) before trying to view in your goggles? That needs to be done to clear serialpassthrough.

Yes. Got new goggles today and still nothing.

Below are some images. I have PAL selected on the Foxeer camera, the Raptor S MWOSD configurator, and my goggles and I only see the Foxeer OSD which I don't want. I have an LC filter that is bringing in just 12 volts to the camera and vtx and thus it doesn't display the correct voltage and so I'd like the voltage from the Raptor S to show me what I really have.

Edit: when I switch everything to NTSC, the video feed falls from the top and repeats (And still no OSD).