17-Jan-2016, 04:05 AM (This post was last modified: 17-Jan-2016, 04:33 AM by Kill-Switch.)
I recently purchased one of the X-racer boards from FPVModel and am having an issue with flashing Betaflight. The board was pre-loaded with Cleanflight. Each time I try to load any firmware it get the "Failed to connect to bootloader" message.
Any advise? I have tried pushing the boot jumper prior to power up, I have hooked up a bec to power the board before hooking up to the usb, I have tried multiple things to try to get it to flash, nothing is working. I have several naze32 boards and have never had this issue.
Any advise? I have tried pushing the boot jumper prior to power up, I have hooked up a bec to power the board before hooking up to the usb, I have tried multiple things to try to get it to flash, nothing is working. I have several naze32 boards and have never had this issue.