Hey folks I'm new here (so I'm sorry if I do anything wrong) and wanted to ask if any of you managed to flash a Turnigy Plush 32 ESC with BLHeli32 Firmware. My understanding is, that the Plush 32 don't come with any sort of bootloader and I would need the BLHeli one in order to be able to use the 1-wire interface.
Can anyone help me do this? If it is not possible, are there any alternatives firmwarewise? Can I flash BLHeli_S on a 32 bit architecture?
Thanks in advance!

I have never bothered with non-Blheli escs.

There is an RCG thread walking users through the process: https://www.rcgroups.com/forums/showthre...al!/page72

(09-Nov-2021, 10:15 AM)kafie1980 Wrote: I have never bothered with non-Blheli escs.

There is an RCG thread walking users through the process: https://www.rcgroups.com/forums/showthre...al!/page72

Thank you very much!
The thread you linked, does show the process to flash (i think) 8 bit ESCs. Do you know if its fine to do the same procedure on 32 bit ESCs?

(13-Nov-2021, 06:53 PM)Ingegneus Wrote: Thank you very much!
The thread you linked, does show the process to flash (i think) 8 bit ESCs. Do you know if its fine to do the same procedure on 32 bit ESCs?

I am not completely sure if you can flash BLHeli_32 on any ESC's without a valid license.

AM32 is another alternative for unlicensed options: https://github.com/AlkaMotors/AM32-Multi...C-firmware