Just got one of these PDB from RCtimer.



Although I have to say, I don't like their pad layout. Battery wires have to cross over ESC wires and are way too close to the opposite pole.

Also, the BEC output is 5.3V, which would fry any voltage sensitive devices like the minimOSD. 

I'm also worried that the current sensor may be outputting a 5V analog signal rather than the 3.3v one the STM32 based FCs need.. could fry the pin. 

They seem to have cloned an APM power module.. which isn't usable for our applications. So this will only work safely with their BeeRotor F3 FC.

That is exactly designed for the BeeRotor F3 FC, not really for other FC.

No need for a minimosd since there is already an OSD built into the BRF3 FC. It could be a great combo or it might be a total fail, only testing will see. If it isn't up to par, it will go away and a F3 with a SPI gyro interface will take its place.