Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Beecore F3 FC for Inductrix Tiny Whoop E010
#46
(26-Dec-2016, 05:56 AM)Tom BD Bad Wrote: It has taken me 2 months of internet trawling to find a supplier of mylipo's here in South Africa, I'm actually very surprised that they are offered at quite competitive prices, most stuff for the hobby is basically double what you pay on BangGood!

Anyway Gulzaar, I feel your pain and wish you the best of luck finding a supplier, maybe if you have friends that you fly with you could order some together and split shipping costs..? Just a thought.

Yeah, trying to get some people to come together and place a large order.

As for the time being, I've found these lipos which Albert Kim(YouTube) is pretty happy with:
http://www.tmart.com/3-7V-200mAh-30C-Lip...51462.html
And I've also requested a friend to get me some MyLipos from the USA, luckily someone is coming.

I'll post test results of both batteries once I have them.
Multirotor Maniac
Website => http://fpvfrenzy.com
Reply
Login to remove this ad | Register Here
#47
Does anyone know if the Frsky version can run telemetry?
Reply
#48
(03-Jan-2017, 02:12 PM)oyvinla Wrote: Does anyone know if the Frsky version can run telemetry?

I have the BeeCore FrSky F3 EVO Brushed FC and Manual. The manual does not mention telemetry at all. Also all the small FrSky Rx do not have the transmit circuit; they do this to save weight. Also you can not program the LED on the board. So hope your radio has a timer, otherwise you can not tell when the batteries are done (other , than it falling out of the sky).
Reply
#49
I have the FrSky version. I don't think it runs telemetry... not that I've found anyways. I guess I'm used to not having notifications of low batteries. I find it's only a real problem if you do a really mild flight or start and stop frequently. When my batteries are done, it's pretty obvious. And the quad doesn't really just drop (for me). Just by going when the quad gets sluggish, I reliably come down around 3.6.

THIS (link below), however, does support telemetry for FrSky (but unlike the advert IS NOT SBUS. It's ppm). But it flies really well. The solder pads are in a terrible place and tiny. The bind button is in the way of some camera mounts. but overall it's really pretty great, cheap and fits the E010 frame perfectly (including the "4th" screw in the middle of the frame).

http://www.gearbest.com/multi-rotor-part...90130.html
Reply
#50
I got my hands on some MyLipo.de packs and man, they make all the difference in the world! With 16,000 kv motors, its a beast - the first minute is very very responsive, but then it begins to sag. I get about 2 minutes total flight time and land at 3.7 volts.
Multirotor Maniac
Website => http://fpvfrenzy.com
Reply
#51
(27-Jan-2017, 10:14 AM)gulzaar Wrote: I got my hands on some MyLipo.de packs and man, they make all the difference in the world! With 16,000 kv motors, its a beast - the first minute is very very responsive, but then it begins to sag. I get about 2 minutes total flight time and land at 3.7 volts.

To be honest for me the whoop is a bit of stick time indoors while the weather is bad; I'd rather have a minute or two more than 'insane' power Smile
Reply
#52
Can I fly the modified E010 thusly;
 http://www.banggood.com/Eachine-E010-Fra...mds=search


with the simple EM 16 transmitter I got with my JJpro 200
http://www.banggood.com/JJRC-JJPRO-P200-...65994.html

AFAIK, the E010 can be bought in a FLYSKY protocol which is the same as the EM 16 which uses the AFHDS? Or am I going in the wrong direction?

Thanks for your help!!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  LHCP ufl Antenna suggestion for 80mm whoop Maverick 19 657 12-Mar-2024, 11:41 AM
Last Post: Yohfpv
  Pavo Pico Brushless Whoop Quadcopter HD version Giedrius121 4 201 23-Feb-2024, 02:51 AM
Last Post: Pathfinder075
  75mm whoop - budget conscious build Pathfinder075 25 951 13-Feb-2024, 05:48 AM
Last Post: Pathfinder075
  sluggish whoop, possible causes? WoodenShoeNo 5 169 02-Feb-2024, 01:27 AM
Last Post: hugnosed_bat
  A 23g 65 walksnail whoop Cyberess 1 201 28-Jan-2024, 05:45 AM
Last Post: hugnosed_bat


Login to remove this ad | Register Here