27-Apr-2016, 06:26 PM
Hey Everyone,
I know a lot about lipos now, but there's just a few things I'm still unsure of. I'm currently running tatuu 75c 1300mah with rs2205 2300kv. I know it flies fine with the pack but the setup does use up a lot of amps. According to Oscar's data:
Gemfan 5045×3 Triblade
%50
thrust 417
amp 5.4
watt 87.5
efficiency 4.77
%100
thrust 1155
amp 27.3
watt 442.3
efficiency 2.61
The 4 motors @ 100% throttle should use 109amps. My 1300mah lip @ 75c should be able to supply 97.5 amps (<---------- I hope this is correct) The lipo also has burst rating, so it should be more than enough.
What I would like to know is what happens if I was to use a 1300mac @ 30c supplying 39 amps. Do I just get huge voltage sag? Or can the battery get damaged easily.
Thanks!
~t.goat
I know a lot about lipos now, but there's just a few things I'm still unsure of. I'm currently running tatuu 75c 1300mah with rs2205 2300kv. I know it flies fine with the pack but the setup does use up a lot of amps. According to Oscar's data:
Gemfan 5045×3 Triblade
%50
thrust 417
amp 5.4
watt 87.5
efficiency 4.77
%100
thrust 1155
amp 27.3
watt 442.3
efficiency 2.61
The 4 motors @ 100% throttle should use 109amps. My 1300mah lip @ 75c should be able to supply 97.5 amps (<---------- I hope this is correct) The lipo also has burst rating, so it should be more than enough.
What I would like to know is what happens if I was to use a 1300mac @ 30c supplying 39 amps. Do I just get huge voltage sag? Or can the battery get damaged easily.
Thanks!
~t.goat