10-Jan-2018, 06:12 PM
So my girlfriend very kindly got me the Rooster for Christmas. HobbyRC delivered yesterday!! Have built the frame up which was not the easiest if i'm honest. Getting the sunk nuts in was scary. The video on Armattan's website shows Chris just bashing them in with a hammer. I thought i'd try and pull them in with a screw but that didn't work so the hammer it was lol. Slight delamination on those pieces as per the Armattan video. tbh it is minimal and like they say won't affect warranty or anything. Another thing the supplied bolts are hard to use - again i've just seen Armattan release a video about this. The hex sizes are all over the place makes it hard to get proper tight. But I have persevered and managed to get it solid
Rooster Frame
Oomph Titan's
Betaflight F4
Betaflight 32 bit ESCs
R-XSR
Unify Pro HV
So the only thing I haven't yet got is the FPV cam. Needs to be the newer 3 hole ones. I really wanted to use the RR Swift like I have on the Chameleon but it wont fit. I'm leaning towards the Eagle 2 Pro, as I use Dom V3s anyway and would like to try a proper 16:9 camera. Thoughts??
I cannot wait to get this built and up in the air!
hendrixhughes
Rooster Frame
Oomph Titan's
Betaflight F4
Betaflight 32 bit ESCs
R-XSR
Unify Pro HV
So the only thing I haven't yet got is the FPV cam. Needs to be the newer 3 hole ones. I really wanted to use the RR Swift like I have on the Chameleon but it wont fit. I'm leaning towards the Eagle 2 Pro, as I use Dom V3s anyway and would like to try a proper 16:9 camera. Thoughts??
I cannot wait to get this built and up in the air!
hendrixhughes