16-Nov-2016, 10:16 PM
I had a pretty hard crash, and after that my copter won't initialise. The ESC initialising beeps don't complete!
On removing the fc (XRacer 2.1) I found that, it won't connect to the configurator! It is being detected on the COM port though and also I am able to flash the board with different version of betaflight. Any help or insight to what could be the problem?
On removing the fc (XRacer 2.1) I found that, it won't connect to the configurator! It is being detected on the COM port though and also I am able to flash the board with different version of betaflight. Any help or insight to what could be the problem?