I want to build a quad for freestyle and most a bit of cruising. Planning to use 6s batteries and maybe mount a hd camera on it.

Going for low cost as possible build:


FC: YSIDO NEW F4 V3S PLUS Flight Control FC Support BetaFlight/INAV BLS-45A 4in1 ESC Stack For RC FPV Drone Plane Quadcopter
https://www.aliexpress.com/item/10050055...F6PS4&mp=1

Frame: Quadcopter Mark 4 5inch 224mm 7inch 295mm FPV Carbon Fiber Frame For FPV Freestyle RC Racing Drone qudcopter
https://www.aliexpress.com/item/10050059...zzwys&mp=1


Camera: RunCam Phoenix 2 SP Camera DC 5-36V Screen Ratio 4:3/16:9 7.5g 19*19*21mm Night View for RC FPV Racing Drones Quadcopter

Motor:  iFlight XING E PRO 1700kv

VTX: [b]Eachine TX805 5.8G 40CH 25/200/600/800mW FPV Transmitter VTX LED Display Support OSD/Pitmode/Smartaudio[/b]

Reciever: ELRS MINI 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range ELRS Receiver For RC FPV Long Range Racing Drone Quadcopter Airplane

GPS: Walksnail WS-M181 GPS M10 GNSS BUILT-IN QMC5883 Compass Ceramic Antenna for RC Airplane FPV Freestyle Long Range Drone Model

Do you know what unified config file you will use for this FC?

I also wanted to ask what is your experience building? Because I see a few potential issues related to the lack of information on the stack and frame.

I was going to start from scratch in betaflight if that was what you are asking. I’m fairly knowledgable in building tiny whoops and I have some decent experience with soldering.

Just concern that there is no mention of what config file (custom settings) you will need. I guess the new BFC will auto detect, so it might not be an issue.

The YSIDO F4 V3S Plus FC is an Airbot Omnibus V3 clone, so it will use the OMNIBUSF4SD Betaflight target.

Thanks! Actually I was looking originally at the Speedybee F405 + ESC v3 (as a more premium FC, seeing that many people have used it) , but seen some of your older posts about the design flaw on VTX, so I decided to avoid it.

Anyway, it being a less known brand, do you think the YSIDO should work as described ? (As its cheap, I don't mind messing around with configurations and HW connection)

(12-Dec-2023, 04:56 PM)voodoo614 Wrote: I also wanted to ask what is your experience building? Because I see a few potential issues related to the lack of information on the stack and frame.

Regarding the frame, I have 3D printer so it shouldn't be big problem if things don't fit?

https://www.aliexpress.com/item/10050052...bt6mG&mp=1

4pcs SUN FUN 2207 1750KV 2450KV 2750KV CW Thread FPV Racing Brushless Motor For RC Drone Quadcopter Spare Parts

Trying to skimp on the costs as much as possible (lol). What do you think of these motors?