15-Jan-2016, 09:09 PM
This is my most recent build. I designed the frame myself and it will be available for sale early next week. The motor to motor measurement is 216mm, it stands roughly 21mm tall including hardware but not including the HD camera mount. The bare carbon (Main body, top plate and cam mount) weighs 100grams, with hardware, cam mount and spacer it weighs 134 grams. The main plate is 4mm, top plate and cam mount are 1.5mm, and the 3d printed spacer is 12mm tall.
Parts list:
DAL 5045BN
Cobra 2204/2300kv
DYS 20amp ESCs with BLHeli
Naze32 rev5 with betaflight (powered from 5v PDB BEC)
RMRC PDB with 3 12v becs and 1 5v bec
FatShark 700TVL CMOS cam with gopro lens (powered from 12v PDB BEC via 5v pololu regulator)
Skyzone TS5823S 200MW VTX with SpecUAV skew planar antenna (powered from 12v PDB BEC)
FrSky D4R-II RX de-pinned (powered from FC)
I'm currently running both 3s 1500mah nanotech and 4s 1400mah multistar
total weight including electronics is 326g (no battery or HD cam)
Check out my Youtube channel for flight videos https://www.youtube.com/channel/UCiFCAiZ...5JHBaJ4fkw
Parts list:
DAL 5045BN
Cobra 2204/2300kv
DYS 20amp ESCs with BLHeli
Naze32 rev5 with betaflight (powered from 5v PDB BEC)
RMRC PDB with 3 12v becs and 1 5v bec
FatShark 700TVL CMOS cam with gopro lens (powered from 12v PDB BEC via 5v pololu regulator)
Skyzone TS5823S 200MW VTX with SpecUAV skew planar antenna (powered from 12v PDB BEC)
FrSky D4R-II RX de-pinned (powered from FC)
I'm currently running both 3s 1500mah nanotech and 4s 1400mah multistar
total weight including electronics is 326g (no battery or HD cam)
Check out my Youtube channel for flight videos https://www.youtube.com/channel/UCiFCAiZ...5JHBaJ4fkw