diff all

# version
# Betaflight / STM32F7X2 (S7X2) 4.2.2 Aug 16 2020 / 01:48:06 (e833ac612) MSP API: 1.43
# config: manufacturer_id: TMTR, board_name: TMOTORF7, version: d230cc5f, date: 2019-10-19T23:29:18Z

# start the command batch
batch start

# reset configuration to default settings
defaults nosave

board_name TMOTORF7
manufacturer_id TMTR
mcu_id 0032002c3238510f36353235
signature 

# dma
dma ADC 1 NONE

# feature
feature -RX_PARALLEL_PWM
feature RX_SERIAL
feature ESC_SENSOR

# beacon
beacon RX_LOST
beacon RX_SET

# serial
serial 0 32 115200 57600 0 115200
serial 2 2048 115200 57600 0 115200
serial 3 1024 115200 57600 0 115200
serial 4 64 115200 57600 0 115200

# aux
aux 0 0 0 1700 2100 0 0
aux 1 1 2 1300 1700 0 0
aux 2 13 1 1300 1700 0 0
aux 3 35 4 1300 1700 0 0

# master
set acc_calibration = 89,-16,-136,1
set mag_hardware = NONE
set baro_hardware = NONE
set serialrx_provider = SBUS
set min_throttle = 1070
set use_unsynced_pwm = OFF
set motor_pwm_protocol = DSHOT600
set motor_pwm_rate = 480
set current_meter = ESC
set battery_meter = ESC
set vbat_multiplier = 8
set small_angle = 180
set telemetry_disabled_esc_current = OFF
set telemetry_disabled_esc_voltage = OFF
set telemetry_disabled_esc_rpm = OFF
set telemetry_disabled_esc_temperature = OFF
set osd_warn_batt_not_full = OFF
set osd_vbat_pos = 2049
set osd_rssi_pos = 58
set osd_link_quality_pos = 59
set osd_flymode_pos = 2081
set osd_crosshairs_pos = 2253
set osd_ah_sbar_pos = 2254
set osd_ah_pos = 2126
set osd_current_pos = 23
set osd_compass_bar_pos = 2058
set osd_warnings_pos = 14601
set osd_avg_cell_voltage_pos = 2071
set osd_disarmed_pos = 2379
set osd_esc_tmp_pos = 2104
set osd_flip_arrow_pos = 2094
set vcd_video_system = NTSC

profile 0

profile 1

profile 2

# restore original profile selection
profile 1

rateprofile 0

rateprofile 1

rateprofile 2

rateprofile 3

rateprofile 4

rateprofile 5

# restore original rateprofile selection
rateprofile 0

# save configuration
save
#